-
Wearable wireframe headset with secure, comfortable fit made for fitness and aerobics instructors
-
Integrated moisture-repelling hydrophobic fabric protects the microphone element from harmful corrosion for use in humid environments
-
Flexible gooseneck design provides discrete adjustment options to optimize placement for greatest isolation
-
Lightweight and low-profile form factors stave off fatigue during high-impact use
-
Compatible with Shure wireless bodypack systems for direct replacement of TA4F-connected microphones
-
Included windscreen tames plosive, breath and wind noise for clean and intelligble sound
-
Tailored frequency response refined for crisp and clear vocal reproduction
-
Legendary Shure precision engineering for durability and performance
-
Up to 14 hours of continuous use (2AA batteries)
-
Up to 300 feet (100m) transmission radius (line of sight)
-
Quick and easy frequency matching (GROUP and CHANNEL selection buttons)
-
TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables
-
Tactile on/off switch
-
Adjustable gain control
-
Lightweight, rugged construction
-
One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
-
Up to 12 compatible systems per frequency band (region-dependent)
-
XLR and 1/4" output connectors
-
Working Range: 91 m (300 ft) Line of Sight
-
Audio Frequency Response: 50 to 15,000 Hz Note: Dependent on microphone type
-
Total Harmonic Distortion: 0.5%, typical
-
Dynamic Range: 100 dB, A-weighted, typical
-
Operating Temperature: -18*C (0*F) to 57*C (135*
-
BLX1 Bodypack Transmitter Audio Input Level gain max: -16 dBV maximum
-
BLX1 Bodypack Transmitter Audio Input Level gain min (0 dB) : +10 dBV maximum
-
Gain Adjustment Range: 26 dB
-
Input Impedance: 1 MO
-
RF Transmitter Output: 10 mW, typical varies by region
-
Dimensions: 110 x 64 x 21 mm (H x W x D)
-
Weight: 75 g (2.6 oz.), without batteries
-
Housing: Molded ABS
-
Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
-
Battery Life: up to 14 hours (alkaline)
-
Type: Electret Condenser
-
Frequency Response: 45 to 20,000 Hz
-
Polar Pattern: Unidirectional (Cardioid)
-
Output Impedance: @ 1 kHz 600 O
-
Audio Output Level: -50 dBV/Pa
-
Signal-To-Noise Ratio: @ 1 kHz 66 dB
-
Maximum SPL: 1000 O load, @ 3% THD 145.0 dB
-
Dynamic Range: @ 1 kHz, 1000 O load 117.0 dB
-
Equivalent Output Noise: Typical, A-Weighted 28 dB
-
Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
-
Cable: 1.1 m (45 in.)
-
Connector: TA4F
-
Net Weight: 60 g (2.11 oz.)
-
Included: BLX4 wireless receiver; BLX1 bodypack transmitter; SM31FH Fitness Headset Condenser Microphone with windscreen and cable clip
-
Channel H9 (512-542 MHz)
-
Shipping Weight: 3 lbs
-
Shipping Dimensions: 14 x 12 x 4 in
Features
-
Wearable wireframe headset with secure, comfortable fit made for fitness and aerobics instructors
-
Integrated moisture-repelling hydrophobic fabric protects the microphone element from harmful corrosion for use in humid environments
-
Flexible gooseneck design provides discrete adjustment options to optimize placement for greatest isolation
-
Lightweight and low-profile form factors stave off fatigue during high-impact use
-
Compatible with Shure wireless bodypack systems for direct replacement of TA4F-connected microphones
-
Included windscreen tames plosive, breath and wind noise for clean and intelligble sound
-
Tailored frequency response refined for crisp and clear vocal reproduction
-
Legendary Shure precision engineering for durability and performance
-
Up to 14 hours of continuous use (2AA batteries)
-
Up to 300 feet (100m) transmission radius (line of sight)
-
Quick and easy frequency matching (GROUP and CHANNEL selection buttons)
-
TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables
-
Tactile on/off switch
-
Adjustable gain control
-
Lightweight, rugged construction
-
One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
-
Up to 12 compatible systems per frequency band (region-dependent)
-
XLR and 1/4" output connectors
-
Working Range: 91 m (300 ft) Line of Sight
-
Audio Frequency Response: 50 to 15,000 Hz Note: Dependent on microphone type
-
Total Harmonic Distortion: 0.5%, typical
-
Dynamic Range: 100 dB, A-weighted, typical
-
Operating Temperature: -18*C (0*F) to 57*C (135*
-
BLX1 Bodypack Transmitter Audio Input Level gain max: -16 dBV maximum
-
BLX1 Bodypack Transmitter Audio Input Level gain min (0 dB) : +10 dBV maximum
-
Gain Adjustment Range: 26 dB
-
Input Impedance: 1 MO
-
RF Transmitter Output: 10 mW, typical varies by region
-
Dimensions: 110 x 64 x 21 mm (H x W x D)
-
Weight: 75 g (2.6 oz.), without batteries
-
Housing: Molded ABS
-
Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
-
Battery Life: up to 14 hours (alkaline)
-
Type: Electret Condenser
-
Frequency Response: 45 to 20,000 Hz
-
Polar Pattern: Unidirectional (Cardioid)
-
Output Impedance: @ 1 kHz 600 O
-
Audio Output Level: -50 dBV/Pa
-
Signal-To-Noise Ratio: @ 1 kHz 66 dB
-
Maximum SPL: 1000 O load, @ 3% THD 145.0 dB
-
Dynamic Range: @ 1 kHz, 1000 O load 117.0 dB
-
Equivalent Output Noise: Typical, A-Weighted 28 dB
-
Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
-
Cable: 1.1 m (45 in.)
-
Connector: TA4F
-
Net Weight: 60 g (2.11 oz.)
-
Included: BLX4 wireless receiver; BLX1 bodypack transmitter; SM31FH Fitness Headset Condenser Microphone with windscreen and cable clip
-
Channel H9 (512-542 MHz)
-
Shipping Weight: 3 lbs
-
Shipping Dimensions: 14 x 12 x 4 in