Package Includes :
-
RCF NX 915-A 15" Active Speaker 2100W Powered PA Stage Monitor
-
RCF CVR NX 915, NX 915-A & NX 945-A Speaker Protection Padded Weatherproof Cover
Features
-
Up to 131 dB Sound Pressure Level
-
2100W Class-D Bi-Amplification
-
45-20000 Hz linear frequency response
-
1.75" Compression Driver
-
15" Woofer
-
FiRPHASE zero degrees phase technology
-
Bass Motion Control woofer excursion management
NX 915-A is masterfully engineered from the ground up to deliver stellar audio performance for solo musicians, bands, and DJs. The combination of 1.75" compression driver, 15" woofer, two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound. Used stand-alone speaker for FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 915-A blends high-performance and reliability in a compact package. Built specifically for demanding live sound applications, it also features multiple rigging points for fixed installation. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.
POWER THAT MOVES
- The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 9 Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. NX 9 is energy-efficient so there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.
SUPERIOR TRANSDUCERS
- Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The new 1.75" voice coil design with Polyimide-Kapton dome features a new bonding technology and reinforcement ribs making it 10 times more rigid than previous models, for increased accuracy and durability. The redesigned phase plug increases sound clarity with less distortion. Low-frequency transducer design gains more stability over higher currents, with less distortion and better heat handling.
BASS MOTION CONTROL
- When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. NX 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, providing extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the new BMC algorithm breaks this rule. In combination with FiRPHASE technology, NX 9 has a new level of audio performance never achieved in this range of speakers.
TOUR-PROVEN WORKHORSE
- NX 9 can operate as either the main system or as a floor monitor. This flexibility makes it a smart choice for a wide range of live sound applications. The rugged all-wood cabinet is easy to carry, thanks to handles on both sides (one on top for NX 910-A). The lower side includes a steel pole socket for mounting on a stand or a subwoofer pole. Each model can also be flown, wall- or truss-mounted using the six included M10 rigging points and special accessories. From the wood cabinet to the final texture and the rugged protective grille, NX 9 offers maximum strength for intensive use on the road and can be used for fixed installation.
NEW PERSPECTIVE ON LINEARITY
- RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.
- The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.
RCF CVR NX 915 Protection Padded Cover for NX 915-A & NX 945-A Speaker Heavy-Duty Weatherproof Polyester Outer Fabric, Foam Rubber Padding And Zip Openings With Velcro Fasteners
-
Outer fabric: 600D polyester on PVC base
-
Internal fabric: 190 T taffeta fabric on PVC base
-
Padding: 10 mm foam rubber
-
Closure / opening: Zip + Velcro
-
Embroidered grey logo
Padded Cover for NX 915-A. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear connection panel, and the pole mount cap.
Physical specifications
-
Color: Black
Shipping information
-
Package Height: 90 mm / 3.54 inches
-
Package Width: 720 mm / 28.35 inches
-
Package Depth: 400 mm / 15.75 inches
-
Package Weight: 2.2 kg / 4.85 lbs
Specifications:
Acoustical Specifications
- Frequency Response -3 dB: 60 Hz ÷ 20 Hz
- Max SPL: 127 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 70°
- Compression Driver: 1", 1.0" v.c.
- Woofer: 8", 2" v.c.
Input/Output Section
- Input signal: bal / unbal
- Input connectors: XLR male, Jack
- Output connectors: XLR female
- Input sensitivity: -2 dBu / +4 dBu
Processor Section
- Crossover frequencies: 1600 Hz
- Protections: RMS
- Limiter: Soft limiter
- Controls: Volume, Boost, Mic/Line
Amplifier Specifications
- Total power: 800 W PEAK
- High frequencies: 200 W PEAK
- Low frequencies: 600 W PEAK
- Total power: 400 W RMS
- High frequencies: 100 W RMS
- Low frequencies: 300 W RMS
- Cooling: Convection
- Connections: VDE AC socket
Cabinet
- Cabinet Material: Composite PP
- Hardware: 2xM10 flying p.
- Handles: 1 top
- Pole Mount/Cap: yes
- Grille: steel
- Colour: Black
Physical Specifications
- Height: 480/18.88 mm/inch
- Width: 291/11.44 mm/inch
- Depth: 276/10.86 mm/inch
- Net Weight: 10.6/23.37 kg/lbs