ProX XAP-AHSQ6 Padded Transport Bag for Allen & Heath SQ-6 Mixer
ProX XAP-AHSQ6 Allen & Heath SQ6 Audio Console, Padded Transport Bag with Shoulder Strap by ALP with 1500 Denier Cordura, Dual Foam and Platex Hardboard Padding, Three Reinforced Handles, Two Exterior Pockets and Heavy Duty 10mm Zipper
Introducing the ProX XAP-AHSQ6 Padded Bag for Allen & Heath SQ6, a custom fit transport bag made by ALP, a manufacturer recognized worldwide for the highest quality and longevity. The Allen & Heath SQ6 sits at the center of a lot of live rigs, from touring front of house setups to house of worship booths and corporate AV shows. It holds your faders, your touchscreen, and your whole mix, and it takes a beating every time it moves. The ProX SQ6 BAG wraps that console in heavy Cordura, layered foam, and a rigid hardboard panel so it shows up at every gig ready to work. You get real impact protection in a bag that is lighter, faster, and easier to handle than a hard case.
Custom Fit for the Allen & Heath SQ6 This bag is built for one console, the Allen & Heath SQ6. A generic bag leaves empty space, and that space lets a mixer slide and bounce with every bump in the road. Over time that movement wears on faders, knobs, and the screen. A dedicated fit keeps the SQ6 seated and steady from the moment you zip it closed.
1500 Denier Cordura Shell The outer shell is made from 1500 denier Cordura, a heavy fabric known for resisting abrasion and punctures. It handles scrapes across loading docks, rubs against van walls, and constant grabbing by stagehands. So the bag keeps protecting your console long after lighter fabrics would start to wear through.
Topstitched Seams with 7/8" Reinforced Border Every assembly is topstitched and finished with a 7/8" reinforced border. Seams and edges are where soft bags usually fail first, especially at the corners. This extra reinforcement helps the bag keep its shape and hold together under the weight of the console, tour after tour.
Two Exterior Pockets Two exterior pockets give you a home for the small stuff that always goes missing. Keep short audio cables, headphones, and other accessories right with the console. When you roll into the venue, what you need to get the SQ6 running is all in one place.
Three Reinforced Handles Three reinforced handles make the bag easy to carry and easy to balance. One person can grab it for a short move, or two crew members can share the load on stairs and ramps. More grip points mean safer lifting and less chance of a drop.
Heavy Duty 10mm Zipper The bag closes with a heavy duty 10mm zipper for fast, smooth access. Bigger zippers resist jamming and hold up to daily use far better than light duty zips. When the changeover clock is running, you need a zipper that works every single time.
Dual Foam Layers with 1/8" Platex Hardboard Panel Inside, protection comes from two layers of 7/16" foam combined with a 1/8" Platex hardboard panel. The foam soaks up shocks and knocks during handling. The rigid Platex keeps the bag from folding in against the controls and helps resist punctures, so pressure from other gear stacked nearby stays off the screen and faders.
Eight Reinforced Base Pads The bottom of the bag rides on eight reinforced pads. These work like small skates that keep the fabric off rough floors, wet pavement, and gritty truck beds. They also help the bag sit flat and stable, spreading the console's weight evenly every time you set it down.
World Recognized ALP Quality ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.
TAA Compliant This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.
Features
- Custom Fit for Allen & Heath SQ6 Sized specifically for the SQ6 console for a snug, secure fit
- 1500 Denier Cordura Shell Heavy fabric that resists abrasion and punctures
- Topstitched Seams with 7/8" Reinforced Border Stronger edges and corners for long touring life
- Silkscreen Logos Clear exterior branding for quick ID by your crew
- Two Exterior Pockets Storage for cables, headphones, and accessories
- Three Reinforced Handles Balanced carrying for one or two people
- Heavy Duty 10mm Zipper Smooth, reliable access that resists jamming
- Dual 7/16" Foam Layers with 1/8" Platex Hardboard Panel Shock absorbing padding with rigid structure to shield the screen and faders
- Eight Reinforced Base Pads Keep the bag stable and off rough or wet ground
- TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
- Made by ALP in Portugal World recognized for the highest quality and longevity
Exterior Dimensions & Weight
- 23.00"H x 9.00"W x 30.00"L - Weight: 11.00 lbs
Shipping Dimensions & Weight
- Box 1 of 1: 25.00"H x 12.00"W x 31.00"L - Shipping Weight: 15.00 lbs
UPC
- 798239010579
