Package Includes
-
2 x RCF NX 912-A 12" DJ / Live Sound 2-Way Active Speaker 2100 Watts w/ Integrated DSP
-
2x RCF SUB8003-AS II 18" Professional Powered Subwoofer Digital Amplifier/DSP 2200W
-
ProX X-SAAMX2PKG Set of 2 | Speaker Pole Mounts Adjustable 32"- 63" | With Bag
- 4x MOGAMI Studio-50
Features
- Up to 130 dB Sound Pressure Level
- 2100W Class-D Bi-Amplification
- 50-20000 Hz linear frequency response
- 1.75" Compression Driver
- 12" Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
NX 912-A is masterfully engineered from the ground up to deliver stellar audio performance for solo musicians, bands, and DJs. The combination of 1.75" compression driver, 12" woofer, two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL of distortion-free sound. Used stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 912-A blends high-performance and reliability in a compact package. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.
Power that moves
The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 9 Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. NX 9 is energy-efficient so there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.
Superior transducers
Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The new 1.75" voice coil design with Polyimide-Kapton dome features a new bonding technology and reinforcement ribs making it 10 times more rigid than previous models, for increased accuracy and durability. The redesigned phase plug increases sound clarity with less distortion. Low-frequency transducer design gains more stability over higher currents, with less distortion and better heat handling.
Bass Motion Control
When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.
New perspective on linearity
RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.
The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.
Specifications
Configuration |
|
Enclosure Type |
|
Total Power Capacity |
|
Amplifier Power Rating |
|
Amplifier Class |
|
HF Driver |
|
HF Voice Coil |
|
MF Driver |
|
LF Driver |
|
LF Voice Coil |
|
Magnet |
|
Frequency Response |
|
Maximum SPL |
|
Coverage Angle |
|
Input Sensitivity |
|
Protections |
|
Audio I/O |
|
Network I/O |
|
USB |
|
Wireless Connectivity |
|
Crossover |
|
EQ |
|
Parametric EQ |
|
Semi-Parametric EQ |
|
Dynamic Processing |
|
Alignment Delay |
|
Phase Adjustment |
|
Digital Signal Processing |
|
AC Input Power |
|
AC Power Connector |
|
Power Consumption |
|
Mounting |
|
Handles |
|
Cooling |
|
Construction Material |
|
Dimensions |
|
Weight |
|
Package Weight |
|
Box Dimensions (LxWxH) |
|
RCF SUB 8003-AS II ACTIVE DJ SUBWOOFER 2200W w/ Digital Amplifier & DSP Processing SUB-8003-AS-MK2
The SUB 8003-AS II active subwoofer features the latest generation of RCF woofer technology, digital amplifiers and DSP processing with higher power and enhanced performance. It offers the perfect blend of bass reproduction, high SPL and compact dimensions for mobile use by bands and DJs.
Features
- 2200 W
- 135 dB max SPL
- 35 Hz - 120 Hz frequency response
- 18" Woofer, 4.0" v.c.
- Selectable gain, X-over and delay
- Birch tour grade cabinet
- Stereo XLR input, Stereo XLR signal output
Acoustical Specifications
- Frequency Response -3 dB: 35 Hz ÷ 120 Hz
- Max SPL: 135 dB
- Woofer: 18", 4.0" voice coil
Input/Output Section
- Input connectors: Stereo XLR
- Output connectors: Stereo XLR
- Input sensitivity: -2 dBu / + 4 dBu
Processor Section
- Crossover frequencies: Selectable Hz
- Protections: thermal, rms
- Limiter: dynamic limiter
- Controls: Gain,EQ, phase, xover, delay, cardioid
Amplifier Specifications
- Total power: 2200 W PEAK
- Low frequencies: 2000 W PEAK
- Total power: 1100 W RMS
- Low frequencies: 1100 W RMS
- Cooling: Convection
- Connections: Powercon in-out
Cabinet
- Cabinet Material: Baltic birch plywood
- Handles: 2 side
- Pole Mount/Cap: Yes
- Grille: Steel
- Colour: Black
Physical Specification
- Height: 694/27.32 mm/inch
- Width: 523/20.59 mm/inch
- Depth: 700/27.56 mm/inch
- Net Weight: 43.5/95.90 kg/lbs