B&C 18DS100-8 18" Professional Neodymium Subwoofer 4" Voice Coil 3000W 8-Ohm
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is less heat, more energy in the gap, higher sensitivity, higher power handling, lower distortion and better overall performance. The 18DS100 features a 36.5 mm long, 4 inch diameter (100mm) Copper Clad Aluminum Wire voice coil. With a 1500watt AES power rating, 97.5 dB sensitivity, and over 14.0mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.
Features
-
3000 W continuous program power capacity
-
100 mm (4 in) copper voice coil
-
34 - 1000 Hz response
-
97.5 dB sensitivity
-
Double silicone spider with optimized compliance
-
Ventilated voice coil gap for reduced power compression
-
Aluminium demodulating ring for very low distortion
Specifications
-
Nominal Diameter 460 mm (18.0 in)
-
Nominal Impedance 8 Ω
-
Minimum Impedance 6.1 Ω
-
Nominal Power Handling 1500 W
-
Continuous Power Handling 3000 W
-
Sensitivity 97.5 dB
-
Frequency Range 34 - 1000 Hz
-
Voice Coil Diameter 100 mm (4.0 in)
-
Winding Material Aluminium
-
Former Material Glass Fibre
-
Winding Depth 36.5 mm (1.44 in)
-
Magnetic Gap Depth 16.0 mm (0.63 in)
-
Flux Density 0.7 T
Design
-
Surround Shape Triple Roll
-
Cone Shape Radial
-
Magnet Material Neodymium Inside Slug
-
Spider Double Silicone
-
Pole Design T-Pole
-
Woofer Cone Treatment TWP Waterproof Both Sides
-
Recommended Enclosure 200.0 dm3 (7.06 ft3)
-
Recommended Tuning 35 Hz
Parameters
-
Resonance Frequency 34 Hz
-
Re 4.5 Ω
-
Qes 0.3
-
Qms 9.5
-
Qts 0.29
-
Vas 155.0 dm3 (5.47 ft3)
-
Sd 1210.0 cm2 (187.55 in2)
-
ηâ‚€ 2.1 %
-
Xmax 14.5 mm
-
Xvar 14.0 mm
-
Mms 278.0 g
-
Bl 30.0 Txm
-
Le 4.4 mH
-
EBP 113 Hz