18 Sound 12ND610 is an extremely high output neodymium mid-bass transducer perfect for high quality professional systems
- The 12ND610 is an extremely high output neodymium mid-bass transducer perfect for high quality professional systems. It has been designed for midrange and midbass frequency reproduction in horn-loaded, as well as bass-reflex compact enclosures. Its cone is capable of carrying significant loadings thanks to a dedicated reinforcing treatment.
- The transducer's extremely powerful neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling result in the best power to weight ratio on the market today. 12ND610 curvilinear paper cone has been designed by Eighteen Sound engineers with a special high-strength wood pulp to achieve the best possible linearity within its intended frequency range and to control bell-mode resonances around the cone circumference.
- The cone is carried by a multiroll suspension built from a linen-like material, which is more resistant to aging and fatigue than traditional materials. The 75 mm (3 in) state-of-the-art inside outside voice coil is similar to the one fitted to our top-of-the-range 18" and 15" models but it's wound with aluminum wire.
- It employs our Interleaved Sandwich Voice coil (ISV) technology in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The final result is an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard.
- A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 12ND610 far more resistant to the corrosive effects of salts and oxidization.
Key Features
-
102 dB SPL 1W / 1m average sensitivity
-
75 mm (3 in) Interleaved Sandwich Voice coil (ISV)
-
450 W AES power handling
-
Neodymium magnet assembly
-
Very shallow profile, 124 mm (4,9 in)
-
Water resistant cone
-
Suitable for midrange and mid-bass loaded application
General Specifications
Nominal Diameter |
|
Rated Impedance |
|
AES Power |
|
Program Power |
|
Peak Power |
|
Sensitivity |
|
Frequency Range |
|
Power Compression at -10dB |
|
Power Compression at -3dB |
|
Power Compression at Full Power |
|
Max Recomm. Frequency |
|
Recomm. Enclosure Volume |
|
Minimum Impedance |
|
Max Peak To Peak Excursion |
|
Voice Coil Diameter |
|
Voice Coil winding material |
|
Suspension |
|
Cone |
|
Thiele Small Parameters
Fs |
|
Re |
|
Sd |
|
Qms |
|
Qes |
|
Qts |
|
Vas |
|
Mms |
|
BL |
|
Linear Mathematical Xmax |
|
Le (1kHz) |
|
Ref. Efficiency 1W@1m (half space) |
|
Mounting information
Overall diameter |
|
N. of mounting holes and bolt |
|
Mounting holes diameter |
|
Bolt circle diameter |
|
Front mount baffle cutout ø |
|
Rear mount baffle cutout ø |
|
Total depth |
|
Flange and gasket thickness |
|
Net weight |
|
Shipping weight |
|
Packaging Dimensions |
|