Timpano Bluetooth Car Audio Signal Processor DSP – TPT-SP4BT
We have brought the perfect tools to make your sound system the ultimate music machine!
The compact TPT-SP4BT is signal processor ( DSP ) controlled by bluetooth connection direct from your phone or tablet. This powerful tool allows users to optimize the performance of their custom sound system, regardless of whether they are using a aftermarket unit or factory radio.
The processor’s information can be viewed and configured remotely using smartphones with Android or iOS systems. Its digital signal processor allows real-time modification of equalization, crossover filters, alignment, gain control, phase inversion, limiter, input/output routing, and features such as: Battery Voltmeter, Frequency Generator, Frequency Sweep and Pink Noise.
Its exclusive sequencer feature (SEQUENCER) makes it possible to configure the programmed startup and shutdown of up to three products from the remote startup connections (S1, S2, and S3).
In your device’s app store (Play store) or (Apple Store), search for our TIMPANO TPT-SP4BT app or use the links below to be directed to the app page. Once installed, open the app to configure and use your audio processor
Technical Specifications
| Number of channels |
|
| Graphic equalizer: |
|
| Crossover with freq. Variable: |
|
| Output gain: |
|
| Frequency generator: |
|
| Battery voltage monitor: |
|
| Frequency response: |
|
| Max. Input voltage: |
|
| Max. Output voltage: |
|
| Power supply: |
|
| Max. Output current SEQUENCER: |
|
| Rated current consumption: |
|
| Range: |
|
| Compatibility: |
|
| Dimensions (H x W x L): |
|
| Weight: |
|
Timpano Super Tweeter 4 Inch TPT-ST71 Chrome 8 Ohm
Timpano’s TPT-ST71 bullet tweeter is ideal for two-way speakers and applications that require controlled directivity, high output, and smooth frequency response on high frequencies.
- Its diaphragm features the lastest technology on high frequency tweeters with a 1.5″ voice coil
- They handle 300 watts RMS to provide continuous high output levels
- High sensitivity output designed for pro audio systems
With an aluminum 40° conical dispersion horn, the bullet super tweeter is not your typical bullet tweeter. It has an average sensitivity of 108 dB and a smooth frequency response from 4,000 to 20,000 Hz using a ferrite ring magnet assembly driving an annular ring diaphragm made from mylar diaphragm.
Built In Crossover – Capacitor that acts as a crossover to attenuate low end frequencies that might otherwise harm the super tweeters.
These tweeters are capable of generating high end frequencies at extremely loud volume, to keep up in the high SPL systems. Built with high strength magnet and a mylar diaphragm are designed to reproduce the brightest and crispest sound.
Specifications
- 900 Watts Max Power per pair / 450 Watts each
- 300 Watts RMS Power per pair / 150 Watts each
- Impedance: 8 Ohm each tweeter
- Sensitivity: 108 dB
- Frequency Response: 4,000 – 20,000Hz
- Mylar Diaphragm with a 1.5″ voice coil
Recommended High Pass Filter on TPT-SP4BT DSP, Based on Power per Tweeter
- 7000 Hz under 225 Watts of Amplifier RMS Power with 18dB Slope
- 5000 Hz under 150 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
- Mounting 3”
- Mounting Cutout Diameter: 3.78″
- Overall Size: 4″ x 4″ x 3.17″
- Weight: 3 Lbs each tweeter
Accessories Included:
- HPF Capacitor attached per tweeter
- 1x Timpano Logo Sticker
With a great price-to-performance, these tweeters provides output of professional systems without breaking the bank. Sold as a set of 2 tweeters (pair).
Replacement Diaphragm: TPT-RPST71
Stetsom Bravo HQ800.4 2-ohms 4-Channels car audio digital amplifier.
The BRAVO FULL line was developed for car audio enthusiasts seeking maximum performance and quality in amplifiers.
Its frequency response of 10Hz to 15kHz offers audio quality and definition, allowing it to be used with subwoofers, woofers, drivers, and tweeters.
TECHNICAL SPECIFICATIONS
| CHARACTERISTICS |
|
|---|---|
| Number of Channels |
|
| RMS Power |
|
| RMS Power at 2 Ohm 12.6V |
|
| RMS Power at 4 Ohm 12.6V |
|
| RMS Power at 2 Ohm 14.4V |
|
| RMS Power at 4 Ohm 14.4V |
|
| Power @ 12.6V Bridge 4 Ohms |
|
| Supply Voltage |
|
| Frequency Response |
|
| Crossover Low Pass |
|
| Crossover High Pass |
|
| Signal to Noise |
|
| Input Sensitivity |
|
| Input Impedance |
|
| Consumption with Signal Musical |
|
| Consumption with Signal Bass |
|
| Dimensions (H x W x D) mm |
|
| Weight Kg |
|
