RCF NXW 44-A 3 x 10" Neodymium Active 2-Way Column Speaker with 3x Drivers 2100 Watts DJ System
Features
-
Up to 135 dB Sound Pressure Level
-
2100W Class-D Amplifier
-
100° x 50° Constant Directivity Coverage Angle
-
3" Titanium Neodymium Compression Driver
-
3 x 10" High Power Neodymium Woofers
-
45-20000 Hz linear Frequency Response
-
Bass Motion Control and FiRPHASE processing
-
8 x M8 Rigging Points and 8 x Quick Lock
-
IP Rated Powercon TRUE1 TOP IN/OUT
NXW 44-A is a column speaker masterfully engineered from the ground up to deliver stellar audio performance for bands, DJs, nightclubs, and rental companies.
The best-in-class combination of premium RCF transducers and a 2,100W two-channel amplifier produces coherent 100° x 50° coverage for the listening area up to 135 dB SPL.
The two-way design features three 10? neodymium woofers and a CMD horn-loaded 3? compression driver. The Constant Matching Design horn delivers accurate sound to the coverage area without tilting the cabinet.
The speaker delivers an extended frequency range down to 45 Hz and can be used as a stand-alone speaker, flown or pole-mounted. Pairing the speaker with a subwoofer delivers full-range power for medium-sized concerts and high-powered DJ systems.
Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, the NXW 44-A speaker is tuned for absolute sound clarity and deep, powerful bass response.
The rugged, tour-ready, high-quality baltic birch plywood enclosure is easy to carry and installed securely using dedicated rigging points.
Power that Moves
- The most powerful amplifier in its class. RCF continues to make improvements in transducer design to make them stronger and more powerful. With 2100W of power, the new NXW 2-channel Class-D amplifier is 50% more powerful than previous models.
- The speaker manages extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low power loss. RCF amplifier modules are energy-efficient so there's no need for a cooling fan.
- The amplifier is attached to a solid aluminum heat exchanger to the rear of the cabinet, with no moving parts. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels.
- All amplifiers are designed according to EN62368-1 for maximum safety and house a Switch Mode Power Supply section with minimum weight.
Accurate Performance and Coverage
- The advanced horn design accurately projects the sound energy and avoids unwanted reflections when placed on a sub or a speaker stand. Intelligibility is then significantly increased in acoustically challenging environments. The speaker delivers an extended low-frequency range that is increased when paired with a subwoofer for medium-sized concerts and DJ sets.
Superior Transducers
-
Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.
-
The extended clarity of the 3" compression driver features a neodymium magnet for improved current handling and weight reduction. The best-in-class titanium dome and the Polyimide/Kapton voice coil handle extreme power levels with very low distortion.
-
Three, high-power 10" low-frequency woofers with a new advanced transducer design gain more stability over higher currents, with less distortion, fast transient response, and better heat dissipation.
The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.
NXW 44-A is ideal for high-powered portable and installed professional applications where size is a critical factor. The sleek column design and flexible rigging options make it a smart choice for a wide range of sound applications. The rugged, high-quality Baltic birch plywood enclosure is easy to carry, with ergonomic handles on each side. It can be used alone, on a pole, or paired with a sub, and can also be flown or truss-mounted with included rigging points and special accessories. From the cabinet to the final texture, and the rugged protective grille, NXW 44-A offers maximum strength for intensive use on the road and can be used for fixed installation.
Acoustical specifications
-
Frequency Response: 45 Hz ÷ 20000 Hz
-
Max SPL @ 1m: 135 dB
-
Horizontal coverage angle: 100°
-
Vertical coverage angle: 50°
Transducers
-
Compression Driver: 1 x 1.4'' neo, 3.0'' v.c
-
Woofer: 3 x 10'' neo, 2.5'' v.c
-
Input/Output section
-
Input signal: bal/unbal
-
Input connectors: Combo XLR/Jack
-
Output connectors: XLR
-
Input sensitivity: -2 dBu/+4 dBu
Processor section
-
Crossover Frequencies: 800
-
Protections: Thermal, Excurs., RMS
-
Limiter: Soft Limiter
-
Controls: Linear, Boost, High-Pass presets, Volume
Power section
-
Total Power: 2100 W Peak
-
High frequencies: 700 W Peak
-
Low frequencies: 1400 W Peak
-
Cooling: Convection
-
Connections: Powercon TRUE1 TOP IN/OUT
Standard compliance
- Safety agency: CE compliant
Physical specifications
-
Hardware: 8 x M8, 8 x quick lock
-
Handles: 2 side
-
Pole mount/Cap: Yes
-
Color: Black
Size
-
Height: 1080 mm / 42.52 inches
-
Width: 297.5 mm / 11.71 inches
-
Depth: 373 mm / 14.69 inches
-
Weight: 31.55 kg / 69.56 lbs
Shipping information
-
Package Height: 400 mm / 15.75 inches
-
Package Width: 1115 mm / 43.9 inches
-
Package Depth: 327 mm / 12.87 inches
-
Package Weight: 33.65 kg / 74.19 lbs
RCF SUB 8003-AS MK3 18" Powered Subwoofer 2200 Watts with Internal DSP
Features
-
2200 W
-
135 dB max SPL
-
35 Hz - 120 Hz frequency response
-
18" Woofer, 4.0" v.c.
-
Multi-ply hardwood polyurea-coated
-
Selectable gain, X-over, cardioid mode and time delay
-
Stereo XLR input, Stereo XLR signal output
The SUB 8003-AS MK3 is a self-powered extended low-frequency subwoofer with internal DSP. Its compact cabinet houses a state-of-the-art 18" transducer featuring ceramic magnets and a 4.0? voice coil. The internal amplifier manages up to 2200W power output, delivering sound pressure levels up to 135 dB. Proprietary Bass Motion Control processing provides extended linearity and remarkable sound integrity. Rear panel controls include presets, crossover frequency, and polarity selection, cardioid, and output delay settings. The tour-ready, rugged all-wood cabinet with scratch-resistant polyurea coating is stackable and lightweight, ensuring quick set-ups and tear-downs. Built specifically for highly demanding applications, SUB 8003-AS MK3 is the perfect workhorse for music professionals.
Legendary subwoofers
Industry-Leading Subs
Power that moves
Tour-Ready Workhorse
The RCF cabinets are made of high-quality multi-ply hardwood coated with a black polyurea finish. The subs are stackable and light-weight, for easy set-up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the box in various configurations. The powder-coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.
Specifications
Acoustical specifications
-
Frequency Response: 35 Hz ÷ 120 Hz
-
Max SPL @ 1m: 135 dB
Transducers
-
Woofer:18'', 4.0'' v.c
Input/Output section
-
Input signal: bal/unbal
-
Input connectors: XLR
-
Output connectors: XLR
-
Input sensitivity: -2 dBu/+4 dBu
Processor section
-
Crossover Frequencies: Selectable
-
Protections: Thermal, RMS
-
Limiter: Soft Limiter
-
Controls: Gain, EQ, Phase, Xover, Delay, Cardioid
Power section
-
Total Power: 2200 W Peak
-
Cooling: Convection
-
Connections: Powercon IN/OUT
Standard compliance
-
Safety agency: CE compliant
Physical specifications
-
Handles: One handle each side
-
Color: Black
Size
-
Height: 693 mm / 27.28 inches
-
Width: 505 mm / 19.88 inches
-
Depth: 685 mm / 26.97 inches
-
Weight: 37.6 kg / 82.89 lbs
Shipping information
-
Package Height: 735 mm / 28.94 inches
-
Package Width: 745 mm / 29.33 inches
-
Package Depth: 565 mm / 22.24 inches
-
Package Weight: 44 kg / 97 lbs
Our ProX professional speaker heavy-duty poles for mounting your loudspeaker on most subwoofers. Fits 1 3/8" pocket with M20 Mount Threads.
- M20 Mount Threads
- 20" Ext. Pole
- 200 lbs Load Capacity