QSC RMX4050a 2 channels, 850w /ch @ 8-Ohm, 1400w /ch @ 4-Ohm, 2000w /ch @ 2-Ohm, 4000w /ch @ 4-Ohm (bridged)
With 1400 watts per channel into 4 Ω and 2000 into 2 Ω, all in a chassis that is less than 16" deep, the RMX4050a is perfectly suited for performing musicians. The RMXa Series is an update on a proven line of amplifiers
Features
-
Compact size — up to 2500 watts in two rack spaces, or 5000 watts in three rack spaces
-
High-current toroidal transformers, for greater 2-ohm power and low noise
-
Independent user-defeatable clip limiters reduce distortion
-
Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
-
The 4000-watt RMX4050a operates on a standard 15 amp plug (120V)
-
Both the RMX4050a and the RMX5050a feature a dual mono, high-current power supply for increased reliability and performance
-
The RMX4050a's particularly exceptional combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.
-
Balanced 1/4-inch (6.3 mm) TRS, XLR, and barrier strip inputs
-
Touch-proof binding post and Neutrik Speakon® outputs
-
Front mounted gain controls for easy access
-
Signal and clip LED indicators for monitoring performance
-
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
-
3-year warranty plus optional 3-year extended service contract
Model |
RMX 850a |
RMX 1450a |
RMX 2450a |
RMX 4050a |
RMX 5050a |
Power per Channel, Stereo Mode (both channels driven) |
8Ω, FTC 20 Hz–20 kHz, 0.1% tdD |
|
|
|
|
|
8Ω, EIA 1 kHz, 0.1% tdD |
|
|
|
|
|
4Ω, FTC 20 Hz–20 kHz, 0.1% tdD |
|
|
|
|
|
4Ω, EIA 1 kHz, 0.1% tdD |
|
|
|
|
|
2Ω, FTC 20 Hz–20 kHz, 1% tdD |
|
|
|
|
|
2Ω, EIA 1 kHz, 1% tdD |
|
|
|
|
|
Power, Bridge-Mono Mode |
8Ω, FTC 20 Hz–20 kHz, 0.1% tdD |
|
|
|
|
|
8Ω, EIA 1 kHz, 0.1% tdD |
|
|
|
|
|
4Ω, EIA 1 kHz, 1% tdD |
|
|
|
|
|
Signal to Noise (20 Hz–20 kHz) |
|
Distortion (SMPTE-IM) |
|
< 0.02% |
Input Sensitivity at 8Ω |
|
|
|
Voltage Gain |
|
|
|
|
Output Circuitry |
|
2-tier Class H |
3-tier Class H |
Current Draw (120 V AC) Typical, 1/8 power pink noise at 4Ω* Severe, 1/3 power pink noise at 4Ω* |
|
|
|
|
|
AC Mains Plug 100/120V 230V |
|
NEMA 5-20 CEE7/7 |
Weight Net Shipping |
- 15.9 kg / 35 lb
- 18.6 kg / 41 lb
|
- 18.2 kg / 40 lb
- 20.9 kg / 46 lb
|
- 20.2 kg / 44.5 lb
- 23 kg / 50.5 lb
|
- 30.8 kg / 68 lb
- 34.9 kg / 77 lb
|
- 33.1 kg / 75 lb
- 37.6 kg / 87 lb
|
Distortion (typical) 20 Hz–20 kHz, 10 dB below rated power 1 kHz and below, full rated power |
- < 0.03% tdD, 4Ω and 8Ω
- < 0.03% tdD, 4Ω and 8Ω
|
- < 0.02% tdD, 4Ω and 8Ω
- < 0.02% tdD, 4Ω and 8Ω
|
Frequency Response |
- 20 Hz–20 kHz: +0/-1 dB -3 dB points: 5 Hz and 50 kHz (LF filter bybassed, 8Ω)
|
Damping Factor (1 kHz and below) |
|
> 250 at 8Ω |
Input Impedance |
- 10 kΩ unbalanced; 20 kΩ balanced
|
Input Stage Clipping |
|
6.4 V rms (+18 dBu) |
Cooling |
- Continuously variable speed fan, back-to-front air flow
|
Connectors (each channel) |
- Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+)
- Output: Touch-proof binding posts; Neutrik Speakon®
|
Controls |
- Front: AC switch; Channel 1 & 2 gain knobs
- Rear: 10-position DIP switch
|
LED Indicators |
- Power on: Green; Signal: Yellow (1 per channel); Clip/Protect: Red (1 per channel)
|
Amplifier Protection |
- Full short circuit, open circuit, tdermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
|
Load Protection |
- Turn-on/off muting; AC coupling (850, 1450); Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel
|
Dimensions |
|
610 × 560 × 229 mm 24 × 22 × 9 in |
Power Requirements |
- 100, 120, 230 V AC (factory configured), 50–60 Hz
|
|