| Frequency Range (-10dB) |
|
| Frequency Response (-3 dB) |
|
| Power Rating |
- 500W (2000W peak) Continuous Pink Noise (2 hrs) 1000W Continuous Program(2 hrs) 400W (1600W peak) Continuous Pink Noise (100 hrs)
|
| Maximum Input Voltage |
- 60.0VRMS (2 hrs), 120V peak
|
| Sensitivity |
- 95 dB, 1W @ 1m in half-space (2π loading, average 50 – 90 Hz)
|
| Maximum SPL (1m) |
- 122 dB in half-space (2π loading)
|
| Impedance |
|
| Minimum Impedance |
|
| Recommended Filter |
- 45 Hz, 24 dB/oct high-pass filter
|
| Drivers |
- Two 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring.
|
| Enclosure |
- High Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance.
|
| Grille |
- Thermoset composite coated steel, zinc-plated, 3-layer foam backing.
|
| Outdoor Capability |
- IP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray.
|
| Input Connectors |
- Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection.
|
| Safety Agency |
- ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.
|
| Colors |
|
| Dimensions (H x W x D) |
- 355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
|
| Net Weight (each) |
|
| Shipping Weight |
|
| Included Accessories |
- 1 pc MTC-PC2 input panel cover, 4 pcs floor standing feet 4 pcs beveled washers.
|
| Optional Accessories |
- MTC-210UB (&-WH) U-BracketMTC-SBT300 70V/100V Transformer, 300W multi-tap, installs onto inside of back input panel using included 4 studs.Transformer Taps:70V: 300W, 150W, 75W, 38W100V: 300W, 150W, 75W
|
| Mounting Hardware |
- Optional U-bracket, insert points on top & bottom.
|
| Coverage Angle |
|
