FURMAN PL-PLUS C15A Power Conditioner W/ Pull-out Lights and LED Voltmete (MINT)
For professionals who need to monitor power conditions actively, the Furman PL-PLUS C power conditioner is the ideal 15A solution. It delivers uncompromised protection with Furman's core SMP, LiFT, and EVS technologies while adding a clear, 20-segment LED tri-color AC voltage meter that allows for easy verification of the voltage range, even from a distance or in poor lighting. This model also includes dual retractable front-panel LED lights , eight rear-panel outlets in isolated banks , and a rear BNC connector for a gooseneck lamp, combining advanced monitoring with versatile rack management.
Applications
INSTRUMENT RIGS
You’ve got a rack for your effects, preamps, tuner… You’re going to plug that into the wall One big spike and your rig is up in smoke. The advanced Series Multi-Stage Protection from Furman defends your gear from the spikes and surges that are so common at gigs and practice spots. With the advanced Linear Filtering Technology from Furman, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.
RECORDING
Can’t track down where that noise is coming from Your mix sounding flat With the advanced Linear Filtering Technology from Furman, you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW. The advanced Series Multi-Stage Protection from Furman keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it’s enough to power your whole home studio.
DJ EQUIPMENT
Bars, clubs and other event venues have some of the worst power out there – from air compressors turning on and off, to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman’s advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.
PRO AUDIO
When you’re out there gigging, you never know what kind of power you’re going to get. The wear and tear on mobile rigs eventually takes it’s toll – that’s why it’s smart to plug into Furman Advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you’re setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Technical Specifications
- Response Time :1 nanosecond
- Maximum Surge Current : 6,500 amps
- Construction : Steel chassis, .120” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
- Family :Classic Series
- Line Voltage :120 (Volts)
- Number of Outlets :9
- Number of Isolated Banks : 2
- Outlet Descriptions :All 9 outlets linearly filtered and surge protected
- Rack Mountable :Yes
- Rack Ears Included :Yes
- Front Panel Meter(s) :Segmented LED voltmeter
- Front Media Light(s) :2 multi-LED, dimmable lamps
- Control : Front panel On/Off switch
- Voltage Regulation :No
- Compliance : cTUVus
- USB Charging :N/A
- Low Voltage Trigger :N/A
- AC Power Cord :10 ft, captive 3/14 AWG, with NEMA 15 plug
- Dimensions :19" W x 10.5" D x 1.75" H
- Weight :12 lbs
- Power Consumption :12 Watts
- AC Protection Technology :Extreme Voltage Shutdown, Series Multi-Stage Protection, Non-sacrificial protection with zero ground contamination
- Under-Voltage Shutoff : 90V
- Over-Voltage Shutoff :140 VAC
- Maximum Current Rating: 15 (Amps)
- Initial Clamping Level :188 VAC peak @ 3,000 Amps
- Filtration Technology :LiFT
- Filtration Rating :10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
- Signal Line Protection :No
- UPC :654061027973
UPC
- 654061027973
