| Input |
|
| Input Type |
|
| Input Impedance |
|
| Max Input |
|
| CMRR |
|
| Mic Preamp gain |
|
| Mic Preamp Equivalent Input Noise (EIN) |
|
| Mic Preamp Phantom Power |
|
| Output |
|
| Output Type |
|
| Output Impedance |
|
| Max Output |
|
| I/O Meter |
|
| LCD Display |
|
| A/D Converter |
|
| A/D Dynamic Range |
|
| Type IV Dynamic Range |
|
| Sample Rate |
|
| D/A Dynamic Range |
|
| Dynamic Range |
|
| THD+Noise |
|
| Frequency Response |
|
| Interchannel Crosstalk |
|
| Propagation Delay |
|
| Operating Voltage |
|
| Power Consumption |
|
| BTU |
|
| Unit Weight |
|
| Shipping Weight |
|
| Dimensions |
|
| Safety Agency Certifications |
|
The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
- The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
- The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.
- A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
- The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.
- Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
- All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
- ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.
Features
- 12 Inputs / 6 Outputs
- 6 Balanced Mic/Line Inputs
- 4 Unbalanced, Mono-Summed RCA Input Pairs
- S/PDIF Input
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Comprehensive Signal Metering
- Front Panel LCD
- 9 User-Specified Front Panel Control
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
Specifications
