DBX DriveRack PA2 Complete Loudspeaker Management System
All you need to get the most from your PA. Now with complete control from your mobile device.
- The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
AutoEQ
- New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.
- With the RTA Mic "listening" to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.
Enhanced AFS Feedback Elimination
- Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system's tone.
- Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.
Updated Wizard Setup Functions
- Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.
- Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. Helps you easily configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.
|
Available Input Processing
|
Available Output Processing
|
Features
- All New Setup Wizard
- Streamlined AutoEQ
- All New AFS (Advanced Feedback Suppression)
- Mobile Control (Android®, iOS®, Mac®, Windows®)
- dbx Compression
- Graphic EQ
- 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
- Subharmonic Synthesis
- Crossover (supports full range, 2-way, and 3-way systems)
- 8-Band Parametric EQs (used for speaker tunings) Output
- dbx Limiting
- Driver Alignment Delays
Tested Wireless Routers:
- Dlink 636L
- Dlink Cloud router 2000
- Cisco / linksys: WRT54G2V1
- Netgear WGR614 v7
- Netgear WNR 1000
(Other routers are likely compatible. This list represents those which have been tested thus far.)
Specifications
| Input |
|
| Input Connectors |
|
| Input Type |
|
| Input Impedance |
|
| A/D Converter |
|
| CMRR |
|
| Mic Preamp Phantom Power |
|
| Mic Preamp Equivalent Input Noise (EIN) |
|
| Output |
|
| Output Connectors |
|
| Output Type |
|
| Output Impedance |
|
| Max Output |
|
| A/D Dynamic Range |
|
| Type IV Dynamic Range |
|
| Input Delay Length |
|
| Alignment Delay |
|
| Sample Rate |
|
| Dynamic Range |
|
| THD+Noise |
|
| Frequency Response |
|
| Interchannel Crosstalk |
|
| Operating Voltage |
|
| Power Consumption |
|
| Weight |
|
| Shipping Weight |
|
| Dimensions |
|
| D/A Dynamic Range |
|
ProX's XM-2U VaultX™ series cases are made from an extremely tough Polypropylene Copolymer, these cases are crush resistant and virtually indestructible. This rugged case features a sealed ring, which makes it Airtight and Watertight. This state of the art airline friendly case is a lightweight design that protects your gear like a hard case. It also ATA/TSA approved!
Our unique spring-loaded latch system will keep this case tightly closed, while still allowing for ease of opening. Your acoustic guitar couldn't be safer than it is in a ProX VaultX™ case. Plush Lined Foam Padded Interior with storage compartment!
- Hard-shelled protective case with excellent protection for your rack effects
- Flush, surface mounted latches with red release button for easy access
- Airtight and watertight seal and ideal for air travel
- Watertight at 1 meter for up to 30 minutes - Independently tested to exceed IP67 specifications
*ProX Goes Green: The durable hard rubber foams used in our cases contains 70% recycled content. Of that recycled content, 80% of it comes from recycled plastic bottles and the remaining 20% from recycled post-industrial material. At ProX we strive to make the world a better place!
ProX X-PC10USB 10 Plug Rack Mount Power Distribution Switch With 2 USB Charging Ports
Description
The ProX X-PC10USB Rack mountable 10 Plug 110v Power Distributor with Two USB ports at 2.1 amps and 1.0 amps.
Front mounted Circuit Breaker, single rack unit spacing. A must for DJs, controlling network gear, home and office
Features
- A/C Power Center designed to eliminate extension cords and messy wires
- Two 1A USB charging ports
- 10 lighted switches on front panel
- 15A resetable circuit breaker on front panel
- Ten 120V, 3-prong grounding plug sockets on rear of the unit
- Ideal for switching lights and sound equipment
- Maximum load: 15 amps or 1800 watts
- Single space rack mountable design
- Backlit rocker switches
