Crown Audio CTs-3000 - Two-Channel Power Amplifier -MADE IN USA-

Product Description

The Crown CTs-3000 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. This unit includes a PIP-LITE module for networked controlling via either HiQnet and System Architect or TCP/IQ and IQwic.

High-power, 2-channel, 2U rackmount amplifier for installed sound applications

Switching power supply lowers overall amplifier weight

Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation

Independently selectable Input Sensitivity switching per channel

Rear panel Programmable Input Processor(PIP2) connector accepts accessory expansion modules for specific custom installation requirements

Thermal Level Control(TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat

Junction Temperature Simulation(JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel

Continuously variable fan cooling; venting with front-to-rear forced airflow

Removable balanced terminal block input connectors with "Y" switch

Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems

Complete array of front panel function and warning indicator LEDs for each channel

Complete array of rear panel function and filter switches

Power on indicator flashes when AC mains are under or over voltage

Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.

Crown Audio CTS3000LITE Specs

Output Power	2 ohm Dual (Per Channel): 1500W 4 ohm Dual (Per Channel): 1500W 8 ohm Dual (Per Channel): 1250W 16 ohm Dual (Per Channel): 625W 70V Dual (Per Channel): 1500W 100V Dual (Per Channel): 1500W 4 ohm Bridge: 3000W 8 ohm Bridge: 3000W 16 ohm Bridge: 2500W 140V Bridge: 3000W 200V Bridge: 3000W
Damping Factor	10 Hz - 100 Hz:>3000
Input Sensitivity	Switchable: 1.4V(8/4 Ohms) 26 dB Gain: 2.46V(4 Ohm Load) 3.47V (8 Ohm Load) 1.4V(70V)
Input Impedance	10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)
Gain	71.4:1 (37 dB)
Frequency Response	20 Hz - 20 kHz +/-0.25 dB @ 1 Watt
Signal-to-Noise Ratio	105 dB A-Weighted, below rated power(20 Hz - 20 kHz)
Total Harmonic Distortion (THD)	< 0.35%, at full rated power (20 Hz - 20 kHz)
Input Connections	2 x Balanced 3-Pin Terminal Block Connectors(one per channel)
Output Connectors	1 x 4-Pole Terminal Strip(Ch 1, Ch 2)
Controls Front Panel	1 x Power Switch
Controls (Rear)	1 x Reset Switch 1 x Rotary Channel Level Control(per channel) 1 x 2-Position Operation Mode Switch 1 x Highpass Filter Switch(per channel) 1 x "Y" Input Switch 1 x Interior 3-Position Input Sensitivity Switch(per channel)
Indicators	Front Panel: 1 x Yellow LED Bridge Mode Indicator 1 x Green LED Ready Indicator 3 x Green LED Signal Indicators(per channel) 1 x Red LED Clip Indicator(per channel) 1 x Red LED Thermal Indicator(per channel) 1 x Red LED Fault Indicator 1 x Yellow LED Data Indicator(per channel) 1 x Blue LED Power Indicator Back Panel: No Indicators on Back Panel
Cooling	Continuously Variable Speed Fans Ventilation Grille(Front),Cooling Vents(Back) Front-to-Rear forced airflow
Power Consumption	35 Watts (120 VAC Mains)
Dimensions	19 x 3.5 x 14.25" (483 x 89 x 362mm)
Weight	27.7 lb (12.6 kg)
Specialties	Variable Speed Fan Cooling Thermal Level Control JTS Limiting Circuitry

Product Description