B&C Speakers 10FCX64-8Ω 10" Coaxial Speaker Titanium Diaphragm Material Car
Features:
- 500 W continuous program power capacity
- 70° nominal coverage
- 65 - 18000 Hz response
- 95 dB sensitivity
- 33 mm (1.3”) HF unit exit diameter
General:
- Nominal Diameter 250 mm (10 in)
- Nominal Impedance 8 Ω
- Frequency Range 65 Hz - 18000 Hz
- Dispersion Angle 70 ° (Included by –6 dB down points)
Specifications LF unit:
- Sensitivity - 95 dB (Applied RMS Voltage is set to 2.83V.)
- Nominal Power Handling - 250 W (2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.)
- Continuous Power Handling - 500 W (Power on Continuous Program is defined as 3 dB greater than the Nominal rating.)
- Voice Coil Diameter - 64 mm (2.5 in)
- Winding Material - Copper
- Flux Density - 0.96 T
- Nominal Diameter - 250 mm (10 in)
- Nominal Impedance - 8 Ω
- Minimum Impedance - 6.4 Ω
- Former Material - Kapton
- Winding Depth - 13 mm (0.51 in)
- Magnetic Gap Depth - 8 mm (0.31 in)
- Woofer Cone Treatment - WP Waterproof Front Side
Specifications HF unit:
- Sensitivity - 104 dB (Applied RMS Voltage is set to 2.83V.)
- Nominal Power Handling - 80 W (2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.)
- Continuous Power Handling - 160 W (Power on Continuous Program is defined as 3 dB greater than the Nominal rating.)
- Voice Coil Diameter - 65 mm (2.5 in)
- Winding Material - Aluminium
- Flux Density - 1.6 T
- Nominal Diameter - 250 mm (10 in)
- Nominal Impedance - 8 Ω
- Minimum Impedance - 7 Ω
- Recommended Crossover - 1.2 kHz (12 dB/oct. or higher slope high-pass filter.)
- Inductance - 0.15 mH
- Diaphragm Material - Titanium
Design:
- Magnet Material - Ferrite -
- Woofer Cone Treatment - WP Waterproof Front Side
Parameters:
- Fs - 63 Hz
- Re - 5.5 Ω
- Qes - 0.44
- Qms - 7.9
- Qts - 0.42
- Vas - 25 dm³ (0.89 f³)
- Sd - 320 cm² (49.1 sq²)
- η0 - 1.4 %
- Xvar - 6 mm
- Mms - 37 g
- Bl - 13.4 Tm
- Le - 1.2 mH
- EBP - 143 Hz
Mounting and Shipping Info:
- Overall Diameter - 261 mm (10.3 in)
- Bolt Circle Diameter - 245 mm (9.6 in)
- Bafle Cutout Diameter - 230 mm (8.8 in)
- Depth - 140 mm (5.51 in)
- Flange and Gasket Thickness - 11 mm (0.43 in)
- Net Weight - 5.6 kg (12.35 lb)
- Shipping Units - 1 pcs
- Shipping Weight - 6.5 kg (14.33 lb)
- Shipping Box - 360x360x200 mm (14.17x14.17x7.87 in)
UPC:
- 8059300641231
