Alto STEALTH WIRELESS mint Connect wireless audio to any active loudspeaker

• Add Wireless Connectivity to Any Setup
• Faster Setups and Breakdowns
• Eliminates Complex Cable Runs
• Transmitter: 1 x Dual Channel
• Receivers: 2 x Single Channel
• Reliable UHF Band: 16 Channels
• Adjustable Squelch
• Includes Power Supplies and XLR Cables
• Machine and M10 Screws Included
• Hook-and-Loop Strip

The Alto Stealth Wireless Stereo System is a complete, ready-to-use wireless audio system, which consists of a single dual-channel transmitter and two single-channel receivers. Designed for active loudspeakers, it replaces hundreds of feet of audio cable with a reliable wireless connection. Additionally, the system can accommodate passive speaker and amplifiers as well, resulting much less work, and a huge savings in audio cables.

The transmitter features two combo XLR-1/4" inputs for connecting to a variety of professional equipment including mixers, DJ controllers, or any audio source, while the receiver offers a single XLR output. There are up to 16 reliable UHF channels to minimize interference and a manually-set squelch control with three-settings to help optimize performance. The Alto Stealth Wireless Stereo System ships with an assortment of mounting hardware and accessories including three power supplies, two XLR cables, two M10 screws, two machine screws, and two hook-and-loop fasteners.

• Add wireless audio connectivity to any active loudspeaker
• Enjoy faster setups and teardowns
• Eliminate complex cable runs
• One dual-channel transmitter with two XLR-1/4"
• Two single-channel receivers, each with one XLR output (per unit)
• Replaces up to 200' of console-to-system cabling
• No compromise in audio quality
• Reliable UHF band; 16 selectable channels
• Adjustable squelch eliminates interference
• Grow your system using the optional Stealth Wireless Expander Pack
• Transmitter: 2 x Combo XLR-1/4 inputs
• Receiver: 1 x XLR output (per receiver)

In the Box

• Stealth Wireless Transmitter
• 2 x Stealth Wireless Receivers
• 3 x Power Supplies
• 2 x XLR Cables
• 2 x M10 Screws
• 2 x Machine Screws
• 2 x Hook-and-Loop Strips
• Limited 1-Year Warranty

Transmitter

• Type Dual-channel transmitter
• RF Frequency Range 610 to 640 MHz
• Oscillation Mode PLL
• Channels 16 preset channels (stereo)
• Frequency Response 50 Hz to 17 kHz (3 dB)
• Bandwidth 24 or 30 MHz
• Frequency Stability 0.005%
• Frequency Deviation 20 kHz
• LED Indicators Power On/Off, Sig/Clip
• Power External adapter: 12 VDC / 300 mA
• Output Power <10 mW
• Controls Power switch; channel select; mono/stereo switch
• Dimensions 6.3 x 5.0 x 4.0" / 160.5 x 127.0 x 101.6 mm (with antennas)
• Weight 10.2 oz / 289.2 g
• Receiver
• Type Single-channel receiver
• Channels 16 preset channels
• RF Frequency Range 610 to 640 MHz
• Signal to Noise Ratio >100 dB/A
• RF Sensitivity -100 dBm
• Image Rejection >70 dB
• Total Harmonic Distortion <0.5% @ 1 kHz
• LED Indicator Power On, RF/AF LED indicator
• AF Output Impedance: 660 Ohms balanced
• Squelch 3-step and pilot tone
• Operating Voltage 12 VDC, 300 mA
• Dimensions 4.6 x 2.7 x 1.2" / 116.3 x 69.6 x 31.5 mm (with antenna)
• Weight 4.2 oz / 117.7 g

• Package Weight 3.45 lb
• Box Dimensions (LxWxH) 13.6 x 13.4 x 2.3"