4x B&C 4CXN36 4" Coaxial Speaker 16 Ohm, 110 - 18000 Hz response, 86 dB sensitivity NEW
Features
- 200 W continuous program power capacity
- 70° nominal coverage
- 110 - 18000 Hz response
- 86 dB sensitivity
- Neodymium magnet allows a very light yet powerful motor assembly
- Aluminium demodulating ring allows a very low distortion figure
General
- Nominal Diameter 100 mm (4 in)
- Nominal Impedance 16 Ω
- Frequency Range 110 Hz - 18000 Hz
- Dispersion Angle 70 ° Included by –6 dB down points
Specifications LF unit
- Sensitivity 86 dB Applied RMS Voltage is set to 4V.
- Nominal Power Handling 100 W 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Continuous Power Handling 200 W Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Voice Coil Diameter 34 mm (1.3 in)
- Winding Material Copper Flux Density 0.74 T
- Nominal Diameter 100 mm (4 in)
- Nominal Impedance 16 Ω
- Minimum Impedance 12 Ω
- Former Material Glass Fibre
- Winding Depth 11.2 mm (0.44 in)
- Magnetic Gap Depth 6 mm (0.24 in)
- Woofer Cone Treatment WP Waterproof Front Side
Specifications HF unit
- Sensitivity 102 dB Applied RMS Voltage is set to 4V.
- Nominal Power Handling 25 W 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Continuous Power Handling 50 W Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Voice Coil Diameter 36 mm (1.4 in)
- Winding Material Aluminium Flux Density 1.65 T
- Nominal Diameter 100 mm (4 in)
- Nominal Impedance 16 Ω
- Minimum Impedance 10.2 Ω
- Recommended Crossover2 kHz 12 dB/oct. or higher slope high-pass filter.
- Inductance 0.14 mH
- Diaphragm Material HT Polymer
Design
- Magnet Material
- Neodymium Ring
- Woofer Cone Treatment
- WP Waterproof Front Side
Parameters
- Fs 110 Hz
- Re 10.9 Ω
- Qes 1.05
- Qms 12.1
- Qts 0.97
- Vas 1.6 dm³ (0.06 f³)
- Sd 56 cm² (8.68 sq²)
- η0 0.19 % Xvar 5 mm
- Mms 5.8 g Bl 6.43
- Tm Le 1.26 mH
- EBP 105 Hz
Mounting and Shipping Info
- Overall Diameter 127 mm (5 in)
- Bolt Circle Diameter 114 mm (4.51 in)
- Bafle Cutout Diameter 103 mm (4.06 in)
- Depth 84 mm (3.31 in)
- Flange and Gasket Thickness 3 mm (0.12 in)
- Net Weight 0.55 kg (1.21 lb)
- Shipping Units 1 pcs
- Shipping Weight 0.76 kg (1.68 lb)
- Shipping Box 210x210x125 mm (8.27x8.27x4.92 in)
UPC
- 8059300640043
