4x B&C 15SW100-8 15" Professional Neodymium Subwoofer 8-Ohm / 40 - 1500 Hz response NEW
Features
- 3000 W continuous program power capacity
- 100 mm (4 in) split winding copper voice coil
- 40 - 1500 Hz response
- 95 dB sensitivity
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
Specifications
- Nominal Diameter 380 mm (15 in)
- Nominal Impedance 8 Ω
- Minimum Impedance 6.5 Ω
- Nominal Power Handling 1500 W (2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air).
- Continuous Power Handling 3000 W (Power on Continuous Program is defined as 3 dB greater than the Nominal rating).
- Sensitivity 95 dB (Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance)
- Frequency Range 40 Hz - 1500 Hz
- Voice Coil Diameter 100 mm (4 in)
- Winding Material Copper Former Material Glass Fibre
- Winding Depth 32 mm (1.26 in)
- Magnetic Gap Depth 16 mm (0.63 in)
- Flux Density 1.15 T
- Woofer Cone Treatment TWP Waterproof Both Sides
Parameters
- Fs 37 Hz
- Re 5.4 Ω
- Qes 0.34
- Qms 4.8
- Qts 0.31
- Vas 110 dm³ (3.9 f³)
- Sd 855 cm² (132.5 sq²)
- η0 1.6 %
- Xmax 12.5 mm
- Xvar 13 mm
- Mms 176 g
- Bl 25.6 Tm
- Le 2.2 mH
- EBP 109 Hz
Design
- Surround Shape Triple Roll
- Cone Shape Radial
- Magnet Material Neodymium Inside Slug
- Spider Double Silicone
- Pole Design T-Pole
- Woofer Cone Treatment TWP Waterproof Both Sides
- Recommended Enclosure 120 dm³ (4.24 f³)
- Recommended Tuning 35 Hz
Mounting and Shipping Info
- Overall Diameter 393 mm (15.5 in)
- Bolt Circle Diameter 374 mm (14.7 in)
- Bafle Cutout Diameter 353 mm (13.9 in)
- Depth 190 mm (7.5 in)
- Flange and Gasket Thickness 16 mm (0.63 in)
- Air Volume Occupied by Driver 6 dm³ (0.21 f³)
- Net Weight 9.6 kg (21.16 lb)
- Shipping Units 1 pcs
- Shipping Weight 10.9 kg (24.03 lb)
- Shipping Box 425x425x224 mm (16.73x16.73x8.82 in)
UPC
- 848864009704.
