B&C 15PS100-4 15" Professional Woofer 1400W 4-Ohm Deep Bass Freq Range 35-1000Hz
B&C's 15PS100-4 speaker features a special 4" copper wire voice coil wound on a fiberglass former using proprietary high temperature adhesives. The 15PS100-4's optimized ceramic ferrite magnet assembly guarantees very good LF dynamic range with a very low distortion figure. This Italian-made professional driver is especially recommended for compact vented enclosures, in which it will deliver solid, deep bass output
Key Features
-
Very long excursion, low distortion design
-
Die cast frame and FEA-optimized ceramic ferrite magnet system
-
700 watts RMS power handling
-
4" copper wire voice coil on fiberglass former
-
Great performance in compact vented pro audio speaker enclosures
-
4 ohm impedance
Specifications
-
Nominal diameter: 380 mm (15.0 in)
-
Nominal impedance: 8 Ohm
-
Minimum impedance: 6.5 Ohm
-
Nominal power handling: 700 W
-
Continuous power handling: 1400 W
-
Sensitivity (1W/1m): 94.0 dB
-
Frequency range: 35 - 1000 Hz
-
Voice coil diameter: 100 mm (4.0 in)
-
Winding material: Copper
-
Former material Glass Fibre
-
Winding depth: 21 mm (0.83 in)
-
Magnetic gap depth: 11 mm (0.4 in)
-
Flux density: 1.05 T
Design
- Surround shape: Triple Roll
- Cone shape: Radial
- Magnet material: Ferrite
- Spider Double: Silicone
- Pole design: T-Pole
- Woofer cone treatment: TWP Waterproof Both Sides
- Recommended enclosure: 100.0 dm3 (3.53 ft3)
- Recommended tuning: 40 Hz
Parameters
- Fs: 33 Hz
- Re: 5.3
- Qes: 0.33
- Qms: 4.8
- Qts: 0.31
- Vas: 152.0 dm3 (5.3 ft3)
- Sd: 855.0 cm2 (132.5 in2)
- 0: 1.8 %
- Xmax: 8.0 mm
- Xvar: 8.0 mm
- Mms: 145 g
- Bl: 22.5 Txm
- Le: 2.1 mH
- EBP: 100 Hz
Mounting And Shipping Info
- Overall diameter 393 mm (26.6 in)
- Bolt circle diameter 374 mm (14.7 in)
- Baffle cutout diameter 354.0 mm (13.9 in)
- Depth 168 mm (6.6 in)
- Flange and gasket thickness 16 mm (0.62 in)
- Air volume occupied by driver 6.3 dm3 (0.22 ft3)
- Net weight 9.8 kg (11.1 lb)
- Service Kit: RCK15PS100
