B&C 15DS115-8 15" Neodymium Subwoofer Speaker 3200W 8-Ohm Bass Sub 35-1000 Hz
This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance. The 15DS115 features a 40mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1600watt AES power rating, 97 dB sensitivity, and over 14 mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range.
Product Specifications
-
Nominal Diameter 15"
-
Power Handling (RMS) 1,600 Watts
-
Power Handling (max) 3,200 Watts
-
Impedance 8 ohms
-
Frequency Response 35 to 1,000 Hz
-
Sensitivity 97 dB 2.83V/1m
- Voice Coil Diameter 4.5"
Thiele-Small Parameters
-
Resonant Frequency (Fs) 33 Hz
-
DC Resistance (Re) 4.9 ohms
-
Voice Coil Inductance (Le) 4.5 mH
-
Mechanical Q (Qms) 5.2
-
Electromagnetic Q (Qes) 0.18
-
Total Q (Qts) 0.17
-
Compliance Equivalent Volume (Vas) 3.32 ft.³
-
BL Product (BL) 38.7 Tm
-
Diaphragm Mass Inc. Airload (Mms) 254.0g
-
Maximum Linear Excursion (Xmax) 16.5 mm
- Surface Area of Cone (Sd) 855.0 cm²
Materials of Construction
-
Voice Coil Wire Material Aluminum
-
Voice Coil Former Fiberglass
- Magnet Material Neodymium
Mounting Information
-
Overall Outside Diameter 15.47"
-
Baffle Cutout Diameter 13.94"
-
Depth 7.83"
-
Bolt Circle Diameter 13.94"
-
Mounting Holes 8