18 Sound 18iD 2-Ohm 18" Neodymium Subwoofer 3600 Watts Neo Sub 30 - 2500 Hz

18 Sound 18iD 2-Ohm 18" Neodymium Subwoofer 3600 Watts Neo Sub 30 - 2500 Hz

18 Sound

Write a Review
SKU:
18 Sound 18ID 2-Ohm T.C.
Condition:
New
UPC:
753807515528
Avaliability:
Free Shipping
Order before 2PM (EST) Mon-Fri for Same Day Shipping
Store Pick Up Available We Price Match! Call Us On 718-272-7228
Now: $1,197.00
Adding to cart… The item has been added
Make an Offer
Award-Winning Service
Free Shipping Orders $49+
30 Days
Easy Returns
Guaranteed
Lowest Price
In-House
Experts

Financing Available

18 Sound 18iD 2-Ohm 18" Neodymium Subwoofer 3600 Watts Neo Sub 30 - 2500 Hz

  • The 18iD is an 18 inch neodymium ultra high performance subwoofer. The transducer has been optimized for vented and bandpass subwoofer cabinet designs and is recommended for being driven by a Class D or iPal (tm*) amplifier able to deliver 3600 Watt program power without clipping. 18 Sound engineers have obtained the best possible results with today's available materials in terms of clean and undistorted LF reproduction at a ultra high SPL, with the lowest possible power compression figure.

  • The 18iD design features include a large displacement suspension system specifically designed for matching the composite fiber reinforced, straight ribbed cone. Thanks to the Triple Silicon Spider (TSS) technology, the 18iD is able to control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term. Bl force factor, as well as all other electro-dynamic parameters, are linear within the working range. This, together with the exceptional high excursion behavior - 70mm before damage, ±14mm linear Xmax - makes the 18iD an extremely low distortion, highly dynamic transducer.

  • The 18iD features a state-of-the-art 5,3" inside outside ISV copper voice coil enabling the 18iD to deliver extraordinary transient results.

  • The 18iD has been developed after intense FEA and fluidodynamics simulation and testing,focusing on dissipating the heat generated by the powerful voice coil. Special attention was given to the optimization of air flow into the gap without introducing audible noise. A low density material air diffractor placed into the heatsink acts as a cooling system, increasing the power handling capability and lowering the power compression figure.

Specifications

Resonant frequency
  • fS
  • 40 Hz
Electrical Q
  • QES
  • 0.27
Mechanical Q
  • QMS
  • 5.50
Total Q factor
  • QTS
  • 0.26
Suspension equivalent air volume
  • VAS
  • 67 litres
DC resistance
  • RE
  • 1.5 Ω
Minimum impedance
  • Zmin
  • 2.0 Ω
Voice coil inductance
  • LE
  • 1.22 mH
Force factor
  • B·l
  • 24 T·m
Suspension mechanical resistance
  • RMS
  • 19.2 N·s/m
 
Suspension mechanical compliance
  • CMS
  • 37 µm/N
Moving mass
  • MMD
  • 392.7 g
Moving mass (including airload)
  • MMS
  • 420 g
Surface of the diaphragm
  • SD
  • 1130 cm²
Effective diaphragm diameter
  • Ø
  • 37.9 cm²
Maximum linear excursion
  • Xmax
  • ± 15.5 mm
Excursion limit
  • Xlim
  • ± 35 mm
Displacement volume at Xmax
  • VD
  • 1751.5 cm³
Efficiency
  • ηâ‚€
  • 1.55 %
Efficiency bandwidth product
  • EBP
  • 148
Award-Winning Service
Free Shipping Orders $49+
30 Days
Easy Returns
Guaranteed
Lowest Price
In-House
Experts