RCF TT 2-A II ACTIVE TWO-WAY SPEAKER
With 134 dB SPL power, extreme linearity and low distortion in a vented two-way enclosure, the active RCF TT 2-A speaker is one of the most flexible speakers in its category.
Though compact and lightweight, the TT 2-A offers the signature high-end TT+ sound quality with a two-channel 1600 W RMS Class-D amplifier, FiRPHASE 0° linear phase response DSP, RDNet networked control, rugged hardware and a complete set of rigging options.
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.
STATE OF THE ART CLASS-D AMPLIFIERS
Two-channel Class-D amplifier with 1600W total power output for an exemplary performance operating with high efficiency into a lightweight solution. TT+ amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio quality.
ENGINEERED FOR MAXIMUM RELIABILITY
The amplifier housing is tightly fitted and sealed to the rear of the cabinet. A recessed and protected panel houses the connections for power, signal and control.
The analog input board is fully featured offering XLR input and output link, preset selections, and a pre-loaded equalization bypass switch. EtherCON input and output connect the system in a daisy chain topology for RDNet networked management.
The rear panel features a simple rotary encoder with a push switch that controls all speaker functions. A bright display helps the system setting. The only switch on the panel sets local or remote control. A simple command from RDNet totally disables the input panel.
The amplifier incorporates a low noise 96 kHz, 32-bit floating-point DSP circuitry to compute FiRPHASE, soft clipping limiters, RMS limiters, polarity, amplitude, timing, and equalization. All the control settings, monitoring of each component and other advanced features are integrated in the RDNet Networked Management software.
DURABLE AND STURDY
The cabinets feature recessed die-cast aluminium side handles powder coated with rubber hand-grip, designed to facilitate transport positioning and loading operations. A bottom pole socket allows the use of the speaker as a point source speaker on a stand or subwoofer pole. A variety of rigging options is available, between six Flying Tracks eyelet mounting rail on the upper and lower sides and four lateral Quick-Fit rigging points.
The speaker cabinet is made of high-quality Baltic birch plywood with a special adhesive to glue every layer; this makes the cabinet completely water-resistant even before the special polyurea paint, applied to create a very thick full coating of the cabinet, making the speaker highly resistant to scratches, bumps, sun, and extreme weather conditions.
HEAVILY BRACED INTERNAL STRUCTURE
The internal structure is heavily braced to survive long term use and transportation. All the parts are assembled on metal inserts with metric screws. The amplifier is housed in a separate chamber from the transducers to offer the best efficiency and reliability.
NEW PERSPECTIVE ON LINEARITY
RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener.
The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.