RCF ART 910-A PROFESSIONAL ACTIVE SPEAKER 2100W Class-D Bi-Amplification
-
Up to 130 dB Sound Pressure Level
-
2100W Class-D Bi-Amplification
-
50-20000 Hz linear frequency response
-
1.75" Compression Driver
-
10" Woofer
-
FiRPHASE zero degrees phase technology
-
Bass Motion Control woofer excursion management
- ART 910-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 10" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound.
- Used as a stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown, the ART 910-A packs high-performance and reliability in a compact enclosure.
- Designed to be the most flexible loudspeaker in its class, it also features multiple rigging points for fixed installation. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing, perfectly tuned for each model, audiences will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.
- The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss.
- ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels.
- All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.
Specifications
Acoustical specifications
- Frequency Response:50 Hz ÷ 20000 Hz
- Max SPL @ 1m: 130 dB
- Horizontal coverage angle:100°
- Vertical coverage angle: 60°
Transducers
- Compression Driver:
- 1 x 1.0'', 1.75'' v.c
- Woofer:
- 10'', 2.5'' v.c
Input/Output section
- Input signal: bal/unbal
- Input connectors: XLR, Jack
- Output connectors: XLR
- Input sensitivity: -2 dBu/+4 dBu
Processor section
- Crossover frequencies: 1800 Hz
- Protections: Thermal, RMS
- Limiter: Soft Limiter
- Controls: Linear, Boost, Stage, Volume
Power section
- Total Power: 2100 W Peak
- High frequencies: 700 W Peak
- Low frequencies: 1400 W Peak
- Cooling: Convection
- Connections: VDE
Standard compliance
- CE marking: Yes
Physical specifications
- Cabinet/Case Material: PP Composite
- Hardware: 1 x M10 Top and Bottom
- Handles: 1 Top
- Pole mount/Cap: Yes
- Grille: Steel
- Color: Black
Size
- Height: 572 mm / 22.52 inches
- Width: 330 mm / 12.99 inches
- Depth: 310 mm / 12.2 inches
- Weight: 15.8 kg / 34.83 lbs
Shipping information
- Package Height: 616 mm / 24.25 inches
- Package Width: 370 mm / 14.57 inches
- Package Depth: 390 mm / 15.35 inches
- Package Weight: 17.5 kg / 38.58 lbs
