PRV SQ6000X 1-Ohm 15th Anniversary Edition 1 Channel Full Range Car Amplifier
Our engineering team focused on achieving Sound Quality first, and then on making our X Series amplifiers amazingly powerful, efficient and Durable.
These efforts led to a remarkable SQochre-Xwire power supply technology combined with using some of the highest quality and most reliable electrical components, featuring an overbuilt power supply on a heavy-duty PCB board taking this amplifier to the next level of performance with an incredible dynamic power output.
Designed to produce a serious 6000 watts at 1 ohm at 13.0 volts with a dynamic power rating of over 7,000 Watts, the SQ6000X amplifier is a great choice for high power loudspeaker systems.
Our proprietary SQochre-Xwire power supply delivers massive output with real-world input voltage levels at an excellent sound quality at a high efficient rate of 79%
|Rated RMS Power at 13.0 V at 1 Ohm||
|Rated RMS Power at 12.0 V at 1 Ohm||
|Rated RMS Power at 12.0 V at 2 Ohm||
Dual 1/0 Gauge power and ground terminals, which translates for maximum current flow and therefore higher power output
Dual 10 Gauge positive and negative terminals, more connections for easy install on multi-speaker systems.
Heavy-duty Components – Overbuilt to perform
HD Sound Quality – Frequency response up to 18,000Hz
High Grade Competition MOSFETs
SQochre-Xwire power supply
High Capacitance Reserve
Balanced Differential and High Sensitivity Inputs
Before connecting your amplifier review all recommendations thoroughly, Any connection to the amplifier input or output must be performed only when the amplifier is OFF.
• The gauge of the power supply wiring is extremely important to reach the desired amplifier output and for the amplifier’s safety. Not using the recommended wire gauge will result in power loss and overheating of cables. It is important that the power supply cables are the shortest possible length. Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity; To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution
• Keep all cables as far away as possible from the ignition cables, electronic injection modules, and starter switch since they may cause noise interference
• In order to avoid interferences, the signal cables ( RCA) must be kept away from the original wiring of the vehicle and from any other power supply cable.
• Amplifier must be installed in a solid and ventilated area. Do not mount amplifier to the back of a subwoofer box; excess vibration may cause damage to the amplifier.
The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.