null

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Pioneer DDJ-SX3 + 4x RCF HDL 6-A + 2x SUB 708-AS II + HDJ-2000MK2-S DJ Package.

(No reviews yet) Write a Review
SKU:
Pioneer DDJ-SX3 + 4x RCF HDL 6-A + 2x SUB 708-AS II + HDJ-2000MK2-S DJ Package.
UPC:
8024530014483
Condition:
New
Order before 3PM (EST) Mon-Fri for Same Day Shipping
$10,819.89
Make An Offer

Product Description

Contact Us For Information, Se Habla Espanol 718 272-7228 / 215 Conklin Ave. Brooklyn NY 11236

Authorized Dealer/ Brand New Item / In Stock!

(4) RCF HDL 6-A ACTIVE LINE ARRAY MODULE 1400 Watts + (2) RCF SUB 708-AS II ACTIVE Portable PA SUBWOOFER 1400 Watts + (1) Pioneer DDJ-SX3 DJ Controller + (1) Pioneer HDJ-2000MK2-S Headphones + (1) AKG WMS40 Mini + (1) ProX XS-DDJSXWLTRB Digital Controller Flight Case W/Sliding Laptop Shelf & Wheels + (2) PM-KIT 3X HDL 6 POLE MOUNT KIT + (2) ProX X-SPAM20 Deluxe Subwoofer Speaker Pole Mount with 20mm (1 3/8") Adapter + (2) XC-PWC14-XLR03 3FT Powercon and XLR Link Cable


The HDL6-A is the ideal choice when line array performance is needed and a fast and easy set-up a must.

  • A 1400 W 2-channel class-D amplifier powers the system.
  • A powerful DSP processes the sound including crossover, phase correction, limiting and protection.
  • The system features state-of-the-art RCF transducers – two powerful 6.0” woofers for a solid bass reproduction plus a high powered 1.7” voice coil compression driver mounted on a precise 100° x 10° waveguide delivers vocal clarity with high definition and an incredible dynamic.

Features


  • 1400 W, two-way amplification
  • 131 dB max SPL
  • 1.7" voice coil neodymium compression driver
  • 2 x high power neodymium 6.0"woofers
  • 48 kHz, 32 bit floating point DSP processing
  • Symmetrical design
  • Extremely low weight
  • FiRPHASE processing

Acoustical Specifications
  • Frequency Response -3 dB: 65 Hz ÷ 20000 Hz
  • Max SPL: 131 dB
  • Horizontal coverage angle: 100°
  • Vertical coverage angle: 10°
  • Compression Driver: 1.0" neo, 1.7" v.c.
  • Woofer: 2 x 6" neo, 2.0" v.c.

Input/Output Section
  • Input connectors: XLR male
  • Output connectors: XLR female
  • Input sensitivity: +4 dBu

Processor Section
  • Crossover frequencies: 900 Hz
  • Protections: Thermal, RMS
  • Limiter: soft limiter
  • Controls: HF correction

Amplifier Specifications
  • Total power: 1400 W PEAK
  • High frequencies: 400 W PEAK
  • Low frequencies: 1000 W PEAK
  • Total power: 700 W RMS
  • High frequencies: 200 W RMS
  • Low frequencies: 500 W RMS
  • Cooling: convection
  • Connections: Powercon in-out

Cabinet
  • Cabinet Material: Composite PP
  • Hardware: array fittings
  • Handles: 2 back
  • Colour: black

Physical Specifications
  • Height: 237/9.3 mm/inch
  • Width: 470/18.50 mm/inch
  • Depth: 377/15.0 mm/inch
  • Net Weight: 11.5/25.35 kg/lbs

Pioneer DDJ-SX3 DJ Controller Serato w/ 4-Channel Mixer Built in & Dual USB


Smooth transition

Boost your creativity with the DDJ-SX3 4-channel DJ controller for Serato DJ Pro. Expanding on the features of our popular DDJ-SX2 controller, the DDJ-SX3 is strong yet portable with a familiar layout and lower latency jog wheels. Loaded with advanced features, this controller is ideal for professional mobile DJs performing at club nights, parties, weddings and corporate events.

Collaborate with MCs, rappers or singers by plugging in 3 different microphones at once via the 3 Mic inputs, then control EQs and apply FX to each. Connect 2 computers at the same time for easy DJ changeovers via the dual USB ports. Coming with free Pitch ‘n Time DJ and Serato Flip Expansion Packs, you can stretch, mix and cut with precision.

'{29947CA6-9846-4299-8F25-4D9BB9DCDF62}

Key features

  • Enhanced vocals

    Whether you’re performing with MCs, singers or guest speakers, 3 people can entertain the crowd at the same time via the 3 Mic inputs. Ensure crystal-clear speech with 3-band EQ, low-cut filter, compressor and reverb control on each. Enhance vocals with Sound Colour FX and Serato DJ Pro FX.

  • Dual USB ports

    Connect 2 computers at the same time for seamless DJ transitions, back-to-back performances or as a backup computer in case your laptop crashes.

  • Professional interface

    With a layout inherited from our flagship Serato controllers, the DDJ-SX3 feels familiar to use. Featuring 4 inputs, connect to CDJs, analogue turntables and use as a stand-alone DJ mixer. Plug in various speakers via the XLR and RCA Master Out and TRS jack Booth Out terminal.

  • Performance Pads

    Use the large multicoloured Performance Pads to instantly trigger 11 Serato DJ Pro features. Watch their colours and illumination change to show the selected pad mode and playing status.

  • Low-Latency Jog Wheels

    We’ve reduced the latency of the jog wheels for even smoother scratching than its predecessor. Optimised for a perfect scratch response, the illuminated cue point markers with cue countdown give you effortless control without needing to look at your laptop.

  • Expansion Packs enabled

    Pitch ‘n Time DJ and Serato Flip Expansion Packs are included. Use advanced features like Key Shift, Key Sync, Flip, Pitch Play and more to mix tracks smoothly.

  • Sound Colour FX

    Add texture and unique sounds to your mixes using the popular Filter, Echo, Jet and Noise FX from the DJM series mixers.

  • Slip Mode

    Keep tracks playing muted during live edits such as loop, scratch or reverse. Release the jog wheel and the track comes back at exactly the right place.

  • Clear audio

    The mic input circuit produces clear audio without distortion to ensure crystal-clear sound even at high input levels.

  • Needle search

    Simply touch the pad to instantly jump to a specific section of a track.

  • Serato Flip

    Part of the included expansion packs, Serato Flip lets you make custom edits of your tracks and play them back at a touch. Get even more creative by skipping or repeating sections on the fly.

  • Pitch ’n Time DJ

    Pitch ’n Time gives you the creative freedom to shift and sync the key of your tracks, as well as to speed up and slow down your tracks to extreme tempos. Enjoy the ability to mix, cut and scratch while maintaining perfect key and audio quality.

  • Paid upgrade to Serato DVS

    Pick up the Serato DVS Expansion Pack to control and scratch with CDJs or turn

Main Features

Plug and Play

  • Yes

DVS upgrade ready

  • Yes

Included DJ Software

  • Serato Flip
  • Serato Pitch 'n Time

Compatible DJ Software

Unlocks Serato DJ Pro

Software System Requirements

Mac:

  • macOS High Sierra 10.13 (updated to the latest version)
  • macOS Sierra 10.12 (updated to the latest version)
  • OS X 10.11 (updated to the latest version)

Windows:

  • Windows® 10, 8.1, 7 (the latest service pack)
  • CPU: Intel® processor Core? i7, i5, i3: 1.07 GHz or above
  • Memory: 4 GB or more of RAM

What's in the box

  • DDJ-SX3
  • AC adapter
  • Power plug
  • USB cable
  • Operating Instructions (Quick Start Guide)
  • Serato DJ Pro EXPANSION PACK VOUCHER

Specifications

Width

  • 26.14 in

Height

  • 2.77 in

Depth

  • 13.95 in

Weight

  • 13.45 lb

Soundcard

  • 24 bit/44.1 kHz

Frequency Range

  • 20 - 20000 Hz

Distortion

  • < 0.003 % (USB)
  • < 0.005 % (LINE)

Performance Control

Channels

  • 4

Deck Control

  • 4 / Dual

Jog Wheel

  • 132.5 mm durable aluminium jog wheel (center illumination)

Serato DJ FX powered by iZotope

  • Yes

Colour FX

  • Echo
  • Jet
  • Noise
  • Filter

FX Parameters

  • 4knob x 3button

Sampler

  • 16slot x 4bank

Hot Cues

  • 8

Manual Loop

  • Yes

Autoloop

  • Yes

Slip Mode

  • Yes

Needle Search

  • Yes

Native Serato Flip

  • Yes

Talkover Function

  • Yes

EQ Isolator

  • Yes

Fader

Fader Start

  • Yes

Crossfader Curve Adjust

  • Yes

Terminals

Inputs

  • 2 LINE (RCA)
  • 2 PHONO/LINE (RCA)
  • 1 MIC (XLR)
  • 1 MIC (XLR/Jack Combo)
  • 1 MIC (1/4 inch Jack)

USB

  • 2 USB B ports

Outputs

  • 1 MASTER (XLR)
  • 1 MASTER (RCA)
  • 1 BOOTH (1/4 inch Jack)
  • 2 HEADPHONE MONITOR (1/4 inch Stereo Phone Jack, 3.5mm Stereo mini-jack)

RCF SUB 708-AS II ACTIVE Portable PA SUBWOOFER 1400 Watts

Thanks to the powerful 18” woofer, with 3.0” voice coil, and the 1400-Watt amplifier, the SUB 708-AS II is the perfect tool to increase the low end performance of a portable PA system, both in terms of output and frequency extension. Thanks to the built-in digital stereo crossover (DSP) with adjustable crossover frequency it can be easily and quickly set up as a satellite speaker system. The SUB 708-AS II perfectly match 12” or 15” satellite speakers.

The SUB 708-AS II is the ideal companion subwoofer the RCF ART 3, ART 7 or D-Line Series.


Features

  • 1400 Watt Digital Amplifier
  • 18" Woofer, bass reflex housing
  • Stereo crossover
  • Switchable crossover frequencies
  • Phase-reverse switch
  • Electronic equalization, soft limiter and protection
  • Stereo XLR input, Stereo XLR signal output

Applications
  • Club sound, DJs
  • Portable PA
  • Rental
  • Small theatre

Acoustical Specifications
  • Frequency Response -3 dB: 35 Hz ÷ 120 Hz
  • Max SPL: 133 dB
  • Woofer: 18", 3.0" v.c.

Input/Output Section
  • Input connectors: Stereo XLR
  • Output connectors: Stereo XLR
  • Input sensitivity: -2 dBu / + 4 dBu

Processor Section
  • Crossover frequencies: 80-110 Hz Hz
  • Protections: thermal, rms
  • Limiter: soft limiter
  • Controls: Volume, EQ, phase, xover

Amplifier Specifications
  • Total power: 1400 W PEAK
  • Low frequencies: 1400 W PEAK
  • Total power: 700 W RMS
  • Low frequencies: 700 W RMS
  • Cooling: convection
  • Connections: VDE connector

Cabinet
  • Cabinet Material: Baltic birch plywood
  • Hardware: Pole mount
  • Handles: 2 side
  • Pole Mount/Cap: yes
  • Grille: Steel
  • Colour: Black

Physical Specifications
  • Height: 665/26.18 mm/inch
  • Width: 505/19.88 mm/inch
  • Depth: 700/27.56 mm/inch
  • Net Weight: 38.0/83.70 kg/lbs

AKG WMS40 Mini Vocal Handheld Wireless Microphone Mic Set

AKG WMS40 Mini Vocal Wireless Handheld

The AKG WMS 40 Mini Vocal Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio. Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.

The AKG SR 40 Mini receiver provides three status LEDs indicating On/Off status, received signal strength (RF Ok), and audio clipping (AF Clip). The Volume control sets the level at the 1/4 inch output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.

The rugged HT 40 Mini handheld transmitter features an On/Off/Mute switch and a sturdy wire-mesh cap protecting the cardioid dynamic microphone element. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.

The system includes:

SR 40 Mini receiver x 1

HT 40 Mini handheld transmitter x 1

Universal power supply with US/UK/EU adapter x 1

AA size dry battery x 1

Features

Up to 30h playtime with one single AA battery

Plug & Play

Gain control on pocket transmitter

Compatible with all AKG MicroMics

Low battery indicator

Smallest and lightest bodypack transmitter in its class

Shipping Weight: 3 lbs

Shipping Dimensions: 12 x 10 x 3 in


ProX XS-DDJSXWLTRB Digital Controller Flight Case W/Sliding Laptop Shelf & Wheels For Pioneer DDJ-SX2 DDJ-SX3 DDJ-RX (Black on Red)

Description

The ProX XS-DDJSXWLTRB Black on Red Flight case with sliding Laptop Shelf is designed by ProX Cases for the PIONEER DDJ-SX3 DDJ-SX2, DDJ-RX or Denon MC7000 Digital DJ Controllers and is made with the highest quality material and workmanship to give you the ultimate security for your controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level every time.

The XS-DDJSXWLTRB is constructed with our rugged signature 3/8" Gig-Ready Series Plywood, with black trim on red honeycomb surface, durable rubber wheels, reinforced steel ball corners, as well as recessed steel padded handles and latches. There is additional space for cables and small accessories in the back and underneath the unit for convenience, as well as a removable front panel for you to access front input jacks easily. The front removable panel allows for easy access to the front controls and headphone/mic jacks.

This ProX case is manufactured with the Honeycomb laminated surface design. Made with the super-sleek look of Honeycomb hexagon grids on all laminated outer shell surfaces, which gives the cases an almost alien look! Also as opposed to regular laminated plywood cases from other manufacturers, the ProX Honeycomb design helps prevent minor to mild scratches. The Honeycomb Digital line design was inspired by the design of New York City Street Manhole covers which are made to handle rough and tough everyday punishment.

All ProX cases during the manufacturing process use CNC technology to assure all cases are consistently built with strict specifications that are required for the high-quality standards that ProX cases is known for since 1984.

For your safety and the safety of your equipment, do not attempt to transport or move with any gear stored on a sliding shelf or side shelf and be aware that sliding shelves can be removed when slid out to its furthest point.

*ProX Goes Green: The durable hard rubber foams used in our cases contains 70% recycled content. Of that recycled content, 80% of it comes from recycled plastic bottles and the remaining 20% from recycled post-industrial material. At ProX we strive to make the world a better place!

Bonus* The XS-DDJSXWLTRB comes with one Color Changing LED Tape (X-S18RGBKIT); pimp your flight case with the new Revolution Plug n Play RGB LED Tape! X-S18RGBKIT includes a 3-key Controller able to change 20 Colors in 19 Modes. The LED strip tape attaches anywhere you need on the case, including under the laptop shelf to provide overhead lighting on your controller and cable space.

Features

ProX has been manufacturing flight cases since 1984 and are designed to protect your investment

  • Black on Red Digital Honeycomb exterior design
  • ATA-300 Style Gig Ready Flight Road Case
  • Signature Series Certified Laminated Gig ready 3/8" plywood
  • High-density foam interior support & casing
  • Recessed spring action recessed handles
  • Industrial heavy-duty and powerful steel ball corners
  • 2x Low Profile Penn-Elcom Durable Tough Rubber Wheels
  • Includes 1U 19" Rack Mount Rails for user installation under controller
  • Plenty of cable management space behind and underneath the controller
  • ?Dual anchor rivets
  • Easy locking fit aluminum tongue and groove
  • Industrial Recessed butterfly twist lock latches
  • Industrial Grade Rubber Feet
  • All Foam padding made from 85% recycled materials
  • ProX Limited Lifetime Warranty

To Fit
Pioneer DDJ-SX3 DDJ-SX2 DDJ-RX digital controllers

Dimensions
30.50"L x 20.00"W x 9.50"H
Weight: 38.00 lbs

Shipping Dimensions
32.00"L x 22.00"D x 11.00"H
Shipping Weight: 44.00 lbs

UPC
019372405665


Pioneer HDJ-2000MK2-S Flagship pro-DJ monitor headphones (silver)

Fine-tuned for the booth

The next generation HDJ-2000MK2s inherit all the best from their predecessor, the HDJ-2000, and add optimised audio quality, enhanced sound isolation, maximum comfort and an even more robust build.

These headphones ensure superb clarity with clear sound separation from deep bass to crisp trebles. Plus they adopt low-volume air chambers and airtight stitching to improve sound insulation and deliver the pristine sound needed for monitoring in the loudest clubs.

Key features

  • Sound isolation

    The ear pads' low-volume air chambers provide maximum insulation, reducing external noise in the mid to low frequencies. Plus their damper and airtight stitching ensure clarity for ease-of-monitoring without needing to crank up the volume in loud clubs.

  • Maximum comfort

    Designed for maximum comfort and durability, these headphones have lightweight bindings on the headband and hanger to reduce the pressure on your head. Their soft, leather-like ear pads with memory foam ensure a snug fit – whether you're performing in a packed club or producing in the studio.

  • Rotatable housing

    Each ear cup swivels a full 90 degrees, while the auto-return feature makes them ideal for on-the-shoulder monitoring. Plus the rugged swivel/fold mechanism and hard carry case means they’re easy to transport between gigs.

  • Built for professional use

    An L-type mini-jack stops the headphones getting knocked or disconnected during performance, even in cramped booths. At the headphone end, a detachable mini-XLR connector means cables can easily be removed for transit or replaced if damaged.

Main Features

Type

  • Circumaural, closed-back dynamic headphones

Driver Units

  • 50 mm dome type

Plug

  • 3.5 mm stereo mini-jack (gold-plated, 2-way, screw-type)

Cord

  • 1.2 m side mount coil cable (3 m extended length)
  • 1.6 m twist-sheathed straight cable

What's in the box

  • 6.3 mm stereo jack (gold-plated, screw type)
  • Carrying case

Specifications

Weight (without cord)

  • 298 g

Maximum Input Power

  • 3500 mW

Output Sound Level

  • 107 dB

Frequency Range

  • 5 - 30000 Hz

Impedance

  • 32 Ohm

RCF PM-KIT 3X HDL 6 POLE MOUNT KIT

Pole mount kit for 3 HDL 6-A. Pins included. + Stacking Bar


Physical Specifications

  • Color: Black

Shipping informations

  • Package Depth: 480 mm / 18.9 inches
  • Package Height: 130 mm / 5.12 inches
  • Package Weight: 3.8 kg / 8.38 lbs
  • Package Width: 370 mm / 14.57 inches

Size
  • Depth: 361 mm / 14.21 inches
  • Height: 120 mm / 4.72 inches
  • Weight: 1.6 kg / 3.53 lbs
  • Width: 470 mm / 18.5 inches

Standard compliance

  • CE marking: Yes

ProX X-SPAM20 Deluxe Subwoofer Speaker Pole Mount with 20mm (1 3/8") Adapter

Description

ProX X-SPAM20 is an adjustable loudspeaker pole with a M20 thread. Height adjustment is easy just mount to top of subwoofer (M20 thread), other end mounts to Speaker (1 3/8") Pole is adjustable from 35" up to 60" total height. All Steel Construction with Built in Safety Pin and Easy-Grip Tension Knob Height Adjustment.

More and more pole mount subwoofers are now equipped with M20 threaded pole mounts instead of a standard 1 3/8" socket cup. A screw attachment provides for no tilt or wobble! The X-SPAM20 is designed for the modern production style of subwoofers as well as the original 1 3/8" pole pockets. Its all-steel shafts telescopes to the height you want, held tight with a friction locking knob backed up by a captive steel security pin. The lower shaft features steel tubing terminated with a threaded lug. The upper shaft is sized to fit satellite speakers with standard 1 3/8" pole mounts. Included threaded adapter to fit standard 1 3/8" pole pockets.

Features

  • Adjustable Subwoofer Pole Fits Threaded M20 Subwoofer Pole Mounts and 1-3/8" Pocket
  • Fits Traditional 1 3/8" and Threaded M20 Subwoofer Pole Mounts
  • Includes Removable 1 3/8" Pocket Adapter
  • Minimum/Maximum Height: 35”/60” (889mm/1524mm)
  • 125 lbs. (56.7 kg) Weight Capacity
  • All Steel Construction
  • Built-In Safety Pin
  • Ergonomic Tension Knob Height Adjustment

To Fit

  • Subwoofers with 20mm Screw pole socket or standard 1 3/8" pocket
  • Including: QSC KW181, KSUB, KLA181, JBL VRX900, VRX915S, VRX918S, SRX718S, PRX618S-XLF, PRX718XLF, PRX400, PRX600, PRX700, STX800 & more...

Shipping Dimensions

  • 3.50"L x 3.00"D x 34.50"H
  • Shipping Weight: 4.00 lbs

UPC

  • 01937240870

ProX XC-PWC14-XLR03 3FT Powercon and XLR Link Cable

Description

The XC-PWC14-XLR03 3FT Powercon and XLR Link Cable connects Powercon Blue to XLR Male and Powercon Grey to XLR Female.

We know cables are not just cables, they are what protects your sound from being altered. An uncompromised signal power, frequency handling, and sound reproduction is what we are passionate about.

  • 20 AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer
  • Compact cable diameter to decrease eddy currents
  • Black PVC jacket for durability, flexibility, and low visibility on stage. The jacket was designed like a tank, armored to withstand rugged heavy road use

Bending, twisting, are no match for our high performance tour-grade power cables. They're designed to provide years of dependable sound reproduction and outlast every other cable on the market! Complete coil technology demands consistent weave tolerances to create precise accuracy and detailed clarity; this is the most important part of the design and greatly affects performance.

To Fit
  • Powercon Blue XLR Male and Powercon Gray XLR Female